![]() |
![]() |
|||
|
9 Volt AC Output Wall Transformer
For use with ALL Electronics USA manufactured LED digital
timers
Rated 9 volts AC @ 500 milliamperes, and U.L. Listed.
Cord length: 6 feet.
These are often purchased as back ups for people using our timers.
They seem to get lost and damaged while in transit! Plus it's just
good practice to have an extra one in any timer application,
especially for industrial settings.
CK-3000R Remote Control for our CK-3000 Timer
This remote has not changed since 2002. It will work with all CK-3000
timers, new or old.
Classic remote with six buttons for setting hours, minutes, and
seconds, plus the slide switch for choosing up or down counting
modes.
Requires any standard CAT5e ethernet type cable. See below if you
need one.
CK-350, CK-4000, CK-36, CK-46 Remote Controls
These two button remotes work with any of our CK-4000, CK-350, CK-36,
and CK-46 digital timers of any vintage and age.
Two buttons: The Red button is for start-stop. The Black button is
for reset back to zero.
Requires a special cable with a 3.5mm stereo plug at one end, and a
1/4 inch stereo plug on the other end. See below for our standard
MK-98 cable.
Super Rugged Remotes for Harsh Conditions!
We offer special remote controls with IP-68 stainless steel buttons
for use in harsh conditions such as dusty or wet
conditions.
The R-68 two button remote can be used with the CK-350 or CK-4000
digital timers.
The R-64 six button remote can be used with our model CK-3000 or
CK-340 digital timers.
Requires any standard CAT5e ethernet type cable. See below if you
need one.
CK-3000HDR Heavy Duty Remote Control
Fully compatible with any CK-340 or CK-3000 digital timer of any
vintage and age
Classic heavy duty red and black "mushroom style"
pushbuttons
Easy to press, easy to use, and very reliable
Recommended for constant use in mild every day environmental
conditions. Not for use in harsh environments like heavy dust or
moisture. See our R-64 remote above.
Replacement Remote Cables for these Electronics USA Timers:
CK-36, CK-46, CK-320, CK-330, CK-340, CK-350, CK-370, CK-3000, CK-3000-PLC, CK-4000
Remote Control Cords for All Electronics USA Timers!
Replace that lost, stolen, damaged, or even sabotaged remote control
cord!
Standard lengths and extended lengths available. Lengths can be
ordered as below. 50 and 100 foot lengths are available but must be
special ordered.
7 Foot Length 25 Foot Length 5 Foot Length
Snap On EMI Filter Choke for Electrical Noise
Reduction
Free upon request for any verified clock or timer purchased within
one year of sale.
Available for $5.00 otherwise.
Very easy to install and highly effective for combating electrical
noise affecting any of our timers or clocks. Recommended for
industrial use!
Extension Cables for the 9 Volt AC Wall Adapter
Extend your wall adapter to 16 feet with a 10 foot cord extension
cable!
Currently
unavailable.
Timer
Questions? Need Help? We're here for assistance! Simply Give
Us a Call.